The Bosch Solution 6000-IP panel is now available for installations which do not require analog phone connectivity (PSTN). Remote connectivity is still available using direct IP addressing or via MyAlarm. For local programming direct connectivity is still available via the CM910B USB lead.

New Macro Scene Countdown command (C) is now available. This parameter is useful when a period of delay needs to be inserted between commands. For example, entering the scene: A1&C60&A2, will arm Area 1, then wait 60 seconds, then Arm area 2. Countdown range is from 0 to 65535 seconds (C0 to C65535) with the highest value corresponding to 18 hours, 12 minutes and 15 seconds. This command is available for Bosch Solution 6000 (from revision 2.53.16) and Bosch Solution 6000-IP panels.

Previously, expansion device markers in Panel Zone Summary view was set at the incorrect offset. This has now been corrected.

Certain GSM options were not being loaded when importing a customer. This has now been corrected.

The keypad simulator would occasionally become unresponsive on slow networks, this has now been corrected.

The Bosch Solution 6000-IP panel uses a global checksum to determine if an upload or download is necessary. Uploads and/or downloads are skipped if deemed redundant.

A new option is available to migrate a Bosch Solution 6000 to a Solution 6000-IP panel. To perform a migration, in Customer Summary view, right-mouse click over the desired panel and select Migrate from the popup menu.

When saving panel data, the RAS security PIN is checked for default value of 12345678. A warning is displayed if this PIN is still at its default setting.
Please ensure that the RAS PIN is always changed from default so that only authorised installers are allowed to access the panel remotely via Bosch Solutionlink.

Connection via modem now works in conjunction with Permaconn™ Virtual Modems.